Search results

The purpose of this paper is to present a novel and effective fabricating method of 3D ceramic photonic crystals with diamond structure.

The reverse diamond‐structure resin molds are fabricated by stereolithography (SL), then ceramic slurry is prepared and injected into the molds under vacuum condition. Subsequently, ceramic photonic crystals are obtained after vacuum freeze‐drying and sintering.

The combination of SL, gel‐casting and freeze‐drying could be used to fabricate the 3D ceramic photonic crystals with diamond structure which have intact structure and minimal shrinkage. The samples have been tested and the experimental results indicate that their band gap is in the range of 10.14‐12.20 GHz, consistent with the simulation results.

The influence of fabrication process on the photonic band gap needs further study.

This paper presents a novel fabricating method of 3D diamond‐structure ceramic photonic crystals based on SL, gel‐casting and freeze‐drying. The method fabricates complex ceramic photonic crystals with high accuracy and helps further research in this field.

Endwall film cooling protects vane endwall by coolant coverage, especially at the leading edge (LE) region and vane-pressure side (PS) junction region. Strong flow impingement and complex vortexaa structures on the vane endwall cause difficulties for coolant flows to cover properly. This work aims at a full-scale arrangement of film cooling holes on the endwall which improves coolant efficiency in the LE region and vane-PS junction region.

The endwall film holes are grouped in four-holes constructal patterns. Three ways of arranging the groups are studied: based on the pressure field, the streamlines or the heat transfer field. The computational analysis is done with the k-ω SST model after validating the turbulence model properly.

By clustering the film cooling holes in four-holes patterns, the ejection of the coolant flow is stronger. The four-holes constructal patterns also improve the local coolant coverage in the “tough” regions, such as the junction region of the PS and the endwall. The arrangement based on streamlines distribution can effectively improve the coolant coverage and the arrangement based on the heat transfer distribution (HTD) has benefits by reducing high-temperature regions on the endwall.

A full-scale endwall film cooling design is presented considering interactions of different film cooling holes. A comprehensive model validation and mesh independence study are provided. The cooling holes pattern on the endwall is designed as four-holes constructal patterns combined with several arrangement choices, i.e. by pressure, by heat transfer and by streamline distributions.

Drawing on the literature of eco-innovation and institutional theory, this research aims to answer two fundamental questions: Does eco-innovation improve or harm firm value in emerging markets? and How institutional environments moderate the relationship between eco-innovation and firm value? We explicate the regulatory, normative and cognitive pillars of institutions, manifested as regulation intensity, environmental agency pressure and public pressure, respectively.

For this study, a cross-sectional panel data set was assembled from multiple archival sources, including data coded from the corporate annual reports and social responsibility reports, statistical yearbooks, China Stock Market Financial Database (CSMAR) and other secondary sources. A hierarchical regression method was used to test the hypotheses. The data comprised 88 firms sampled over four years. The model using feasible generalized least squares (FGLSs) to control heteroscedasticity in errors due to unobserved heterogeneity was estimated.

Empirical findings from a data set compiled from multiple archival sources reveal that both eco-product and eco-process innovation negatively relate to firm value. The interactions between eco-innovation and regulation intensity, environmental agency pressure and public pressure are positively related to firm value.

First, this study extends the literature of eco-innovation by investigating the impact of eco-innovation on firm value. Contrary to the conventional anecdotal evidence of the beneficial effect of eco-innovation, it was found that eco-innovation relates negatively to firm value. Second, this study develops and tests an institutional contingent view of eco-innovation by accounting for the moderating role of regulatory, normative and cognitive pressures.

The COVID-19 crisis has created enormous strain in global supply chains. The disruption has caused severe shortages of critical items, including personal protective equipment (e.g. face masks), ventilators and diagnostics. The failure of the industry to meet the sudden demand for these necessary items has caused a severe humanitarian crisis. These situations, resulting from the COVID-19, crisis have led to the informal growth of frugal innovation in sustainable global supply chains. This paper aims to provide a detailed overview of drivers of frugal-oriented sustainable global supply chains, following lessons acquired from emerging countries’ attempts to deal with the COVID-19 pandemic.

The authors used a focused group approach to identify the drivers and this paper further validated them using existing literature published in international peer-reviewed journals and reports. The authors adopted total interpretive structural modeling (TISM) to analyze the complex relationships among identified drivers.

The authors present a theoretical framework to explain how the drivers are interlinked. This paper has developed the framework through a synthesis of the TISM modeling and Matrice d’impacts croisés multiplication appliquée á un classment analysis. This paper observed that government financial support, policies and regulations, under the mediating effect of leadership and the moderating effect of national culture and international rules and regulations, has a significant effect on the adoption of emerging technology, volunteering initiatives and values and ethics. Further, emerging technology, volunteering initiative and values and ethics have a significant effect on supply chain talent and frugal engineering. These results provide some useful theoretical insights that may help in further investigating the role of frugal innovations in other contexts.

The authors find that outcomes of the methodical contributions and the resulting managerial insights can be categorized into four levels. Industry and researchers alike can use the study to develop the decision-support systems guiding frugal-oriented sustainable global supply chains amid the COVID-19 pandemic and in recovering them thereafter. Suggestions for future research directions are offered and discussed.

The COVID-19 pandemic has badly affected the global economy. The use of social capital as a resource to diversify agribusiness to get more customers and improve the agricultural supply chain is a considerable issue to explore. This study aims to develop a comprehensive measurement of social capital and examine its effect on the intention to diversify agribusiness. From a supply chain perspective, it uses theory of planned behavior (TPB) and resource-based view (RBV).

The study uses a mixed-methods approach. In-depth interviews, focus group discussions and surveys are used. Structural equation modeling on a sample of 465 respondents in Vietnam was employed to examine the hypothesized relationships.

An integrative measurement scale of social capital from an agricultural supply chain perspective is suggested. The study also shows significant causal relationships amongst social capital, motives, TPB's determinants and the intention to diversify agribusinesses in light of supply chain perspectives.

The study offers a significant contribution to the existing body of knowledge in the literature on social capital, motives, TPB, RBV and supply chain perspectives. The study was executed in Vietnam, where most farmers are smallholders, family business owners or micro-scale entrepreneurs in agriculture.

Green sustainability has become a critical challenge for businesses to execute green supply chain management (GSCM). Most of the literature on GSCM emphasizes regulations as drivers and few pieces of research are conducted from an internal organizational culture view. This study aims to use the cultural perspective of market orientation (MO) and draws on both the natural resource-based view (NRBV) and dynamic capability view (DCV) to explore the relationships among green market orientation (GMO), GSCM capability and organizational performance.

A total of 1,000 survey questionnaires were distributed to the Taiwanese electronics industry and 207 valid questionnaires were collected. Data was analyzed using structural equation modeling.

The results show that GMOs have a significant positive impact on GSCM capability, environmental performance and economic performance. Moreover, GSCM capability is positively related to environmental and economic performance. The results also show that GMOs have a significant indirect influence on environmental performance and economic performance through GSCM capability.

The findings of this study suggest how Taiwan’s electrical and electronic manufacturers, while faced with pressure from competitors, customers and regulations (i.e. waste electrical and electronic equipment directive, Restriction of Hazardous Substances Directive and energy-using products directives), should efficiently and effectively implement GMO and enhance GSCM capability to improve organizational performance.

This study fills up the gap between MO and performance indistinct relationships. It has also integrated two perspectives, namely, NRBV and DCV, to explain GSCM capability as a mediator between GMO and organizational performance relationship and to examine the relationships among GMO, GSCM capability and organizational performance.

The purpose of the study is to perform a scientific mapping and detect the evolution pattern of two emerging fields, organizational capabilities and sustainable supply chain management (SSCM), to detect and visualize the existing conceptual domains and identify less-explored areas.

This study uses a methodological combination involving systematic literature review and bibliometric analysis. The methodology was implemented in the following order: definition and selection of the material using an electronic database, descriptive analysis of the material, category selection using bibliographic coupling analysis by VOSviewer (clusterization), material evaluation and content analysis.

The research results clarify the intellectual structure within the academic field. The authors’ identified three main clusters: (1) sustainable capabilities and practices in supply chain management (SCM), (2) green SCM and performance and (3) information technology and innovation. The findings reveal that there is a rich field to be explored, especially regarding issues involving sustainable technological capabilities, sustainable initiatives and key resource development.

This study facilitates researchers’ and practitioners’ understanding and their ability to map the different paths and evolution of SSCM and organizational capabilities. It can encourage managers and policymakers alike to conceive new approaches to engage in the adoption of SSCM.

This work employs a singular approach to identify the intellectual knowledge and topics related to the implementation of SSCM by adopting the theoretical approach of sustainable organizational capacity. It contributes to the debate on distinguishing specific sustainable organizational capabilities from traditional capabilities.

This study aims to develop a polymer cement-based waterproof coating with self-healing capability to efficiently and intelligently solve the building leakage caused by cracking of waterproof materials, along with excellent durability to prolong its service life.

Ion chelators are introduced into the composite system based on ethylene vinyl acetate copolymer emulsion and ordinary Portland cement to prepare self-healing polymer cement-based waterproof coating. Hydration, microstructure, wettability, mechanical properties, durability, self-healing performance and self-healing products of polymer cement-based waterproof coating with ion chelator are investigated systematically. Meanwhile, the chemical composition of self-healing products in the crack was examined.

The results showed that ion chelators could motivate the hydration of C₂S and C₃S, as well as the formation of hydration products (C-S-H gel) of the waterproof coating to improve its compactness. Compared with the control group, the waterproof coating with ion chelator had more excellent water resistance, alkali resistance, thermal and UV aging resistance. When the dosage of ion chelator was 2%, after 28 days of curing, cracks with a width of 0.29 mm in waterproof coating could fully heal and cracks with a width of 0.50 mm could achieve a self-healing efficiency of 72%. Furthermore, the results reveal that the self-healing product in the crack was calcite crystalline CaCO₃.

A novel ion chelator was introduced into the composite coating system to endow it with excellent self-healing ability to prolong its service life. It has huge application potential in the field of building waterproofing.

The coronavirus disease 2019 (COVID-19) pandemic created heavy pressure on firms, by increasing the challenges and disruptions that they have to deal with on being sustainable. For this purpose, it is aimed to reveal the role of the smart circular supply chain (SCSC) and its enablers towards achieving Sustainable Development Goals (SDGs) for post-pandemic preparedness.

Total interpretive structural modelling and Matrice d'Impacts Croises Multipication Applique' a un Classement (MICMAC) have been applied to analyse the SCSC enablers which are supported by the natural-based resource view in Turkey's food industry. In this context, industry experts working in the food supply chain (meat sector) and academics came together to interpret the result and discuss the enablers that the supply chain experienced during the pandemic for creating a realistic framework for post-pandemic preparedness.

The results of this study show that “governmental support” and “top management involvement” are the enablers that have the most driving power on other enablers, however, none of them depend on any other enablers.

The identification of the impact and role of enablers in achieving SDGs by combining smart and circular capabilities in the supply chain for the post-pandemic.

The purpose of this paper is to aim at prioritizing and identifying the interrelations among the green supply chain management pressures, practices and performance measures. The study also compares the reasons of green supply chain management implementation, levels of implementation and improvement in performance for medium and large Indian ceramic enterprises because of green supply chain management implementation.

The most frequent constructs and measures of green supply chain management pressure, practice and performance are identified from the literature. The identified measures are corrected/added/removed, as per the suggestions of industry professionals, to develop a survey instrument. An interpretive structural model is developed to prioritize the constructs. Matriced “impacts croises-multiplication applique” and “classment” (MICMAC) analysis is done to identify the driving and dependence powers of the constructs. The identified results are validated through the descriptive analysis of responses obtained from multiple case studies.

It is observed that the informative pressures followed by coercive and mimetic pressures are the main drivers for the implementation of green supply chain management practices. Internal environmental management in enterprises is found to be the driving power behind the implementation of other green supply chain management practices. The implementation of these practices drives the environmental and operational performance. It is observed, through the multiple case study analysis that the impact of the pressures to adopt green supply chain management practices is high on Indian ceramic enterprises but the implementation of practices is in the early stage. The improvement in performance is also not found to be significant at this stage. This study also found that large ceramic enterprises are doing better than the medium enterprises in terms of green supply chain management implementation, largely because of higher pressures and availability of resources.

This study prioritizes the constructs of green supply chain management pressure, practice and performance for Indian ceramic enterprises and compares the large and medium enterprises on the basis of these constructs.